HRM High Voltage Relay Modules

Browse SHR AUTOSENSOR relay, contactor, and sensor series. For pricing, samples, or cross-reference support, send your specifications.

Angebot anfordern Querverweis

Product family overview

HRM High Voltage Relay Modules application and selection guide

High voltage reed relays use hermetically sealed reed switches and insulation-optimized packaging for low-level, test and instrumentation switching where switching voltage, stand-off voltage and dielectric ratings must be checked separately.

Select this family when the design needs compact high-voltage switching, low leakage, clean signal isolation and repeatable switching in test or instrumentation systems.

Semiconductor ATE and wafer probe switchingMedical high-voltage diagnostic equipmentCable / insulation / hipot test systemsPrecision instrumentation and high-voltage multiplexing

High Voltage Reed Relay principle illustration

1High-voltage input

2Hermetic reed switch

3Insulated relay package

4ATE / medical / HV output

Hauptparameter

Key selection parameters

Spannungsklassen: 4kV / 6kV / 10kV / 15kV / 20kV series
Kontaktformen: 1 Form A and series-dependent options
Spulenoptionen: Model-specific coil voltage; confirm by datasheet/RFQ
Isolationsschwerpunkt: High dielectric strength and low leakage signal switching
Montage: PCB relay, module and custom high-voltage assembly options

Engineering selection notes

Before choosing a model

These notes keep product pages useful for engineers while avoiding overclaims. Final ratings remain model- and application-specific.

Separate switching, stand-off and dielectric ratingsSwitching voltage is the voltage the relay may open or close under specified load. Stand-off/hold-off and dielectric ratings are withstand tests and should not be treated as hot-switching capability.

Dry reed relays are low-bounce, not universally zero-bounceUse model datasheets for operate time and bounce behavior. Reserve bounce-free language for mercury wetted contacts or explicitly specified designs.

Load type controls lifeCapacitive inrush, inductive energy and hot-switching conditions can reduce contact life. Confirm load type, duty cycle and safety margin through datasheet review and RFQ.

Serienvergleich

Product family comparison guide

Use the comparison table as a first selection step, then open the model detail page and datasheet for final engineering confirmation.

Auswahlbereich	Was zu vergleichen ist	Warum es wichtig ist	Nächster Schritt
Elektrische Nennwerte	Voltage, current and load type	Defines safety margin and product family	Open model datasheet and submit RFQ
Steuerung / Ausgang	Coil, contact form or sensor output	Must match the drive or controller circuit	Confirm ordering code
Mechanische Passung	Package, mounting and termination	Affects PCB, panel or cable integration	Check drawing in PDF
Application limits	Temperature, environment and duty cycle	Determines reliability and compliance	Validate with samples

Modellanzeige

Representative models in this family

Each model links to its own detail page and datasheet/RFQ path. Use the All Models index for the complete list.

HRM24-12A0412 Channels 24V Coil and 4KV Contact High Voltage…

Spulenspannung: 24V
Breakdown Voltage: 4KVDC
Voltage classes: 4kV / 6kV / 10kV / 15kV / 20kV series
Contact forms: 1 Form A and series-dependent options

Details · Datenblatt

HRM24-2A152 Channels 15KV Contact and 24V Coil High Voltage…

Spulenspannung: 24V
Breakdown Voltage: 15KVDC
Voltage classes: 4kV / 6kV / 10kV / 15kV / 20kV series
Contact forms: 1 Form A and series-dependent options

Details · Datenblatt

HRM05-12A04HRM05-12A04 Hochspannungs-Reed-Relais-Modul

Voltage classes: 4kV / 6kV / 10kV / 15kV / 20kV series
Contact forms: 1 Form A and series-dependent options
Coil options: Model-specific coil voltage; confirm by datasheet/RFQ
Insulation focus: High dielectric strength and low leakage signal switching

Details · Datenblatt

HRM05-1AHRM05-1A DIN-Schienen-Hochspannungs-Reed-Relais-Modul

Voltage classes: 4kV / 6kV / 10kV / 15kV / 20kV series
Contact forms: 1 Form A and series-dependent options
Coil options: Model-specific coil voltage; confirm by datasheet/RFQ
Insulation focus: High dielectric strength and low leakage signal switching

Details · Datenblatt

HRM05-1A10HRM05-1A10 Hochspannungs-Reed-Relaismodul

Voltage classes: 4kV / 6kV / 10kV / 15kV / 20kV series
Contact forms: 1 Form A and series-dependent options
Coil options: Model-specific coil voltage; confirm by datasheet/RFQ
Insulation focus: High dielectric strength and low leakage signal switching

Details · Datenblatt

HRM05-1A15HRM05-1A15 Hochspannungs-Reed-Relaismodul

Voltage classes: 4kV / 6kV / 10kV / 15kV / 20kV series
Contact forms: 1 Form A and series-dependent options
Coil options: Model-specific coil voltage; confirm by datasheet/RFQ
Insulation focus: High dielectric strength and low leakage signal switching

Details · Datenblatt

HRM05-20A04HRM05-20A04 Hochspannungs-Reed-Relaismodul

Voltage classes: 4kV / 6kV / 10kV / 15kV / 20kV series
Contact forms: 1 Form A and series-dependent options
Coil options: Model-specific coil voltage; confirm by datasheet/RFQ
Insulation focus: High dielectric strength and low leakage signal switching

Details · Datenblatt

HRM05-2A08-HCHRM05-2A08-HC Hochspannungs-Reed-Relaismodul

Voltage classes: 4kV / 6kV / 10kV / 15kV / 20kV series
Contact forms: 1 Form A and series-dependent options
Coil options: Model-specific coil voltage; confirm by datasheet/RFQ
Insulation focus: High dielectric strength and low leakage signal switching

Details · Datenblatt

HRM05-2A10HRM05-2A10 Hochspannungs-Reed-Relaismodul

Voltage classes: 4kV / 6kV / 10kV / 15kV / 20kV series
Contact forms: 1 Form A and series-dependent options
Coil options: Model-specific coil voltage; confirm by datasheet/RFQ
Insulation focus: High dielectric strength and low leakage signal switching

Details · Datenblatt

HRM05-2A15HRM05-2A15 Hochspannungs-Reed-Relaismodul

Voltage classes: 4kV / 6kV / 10kV / 15kV / 20kV series
Contact forms: 1 Form A and series-dependent options
Coil options: Model-specific coil voltage; confirm by datasheet/RFQ
Insulation focus: High dielectric strength and low leakage signal switching

Details · Datenblatt

HRM05-2B10HRM05-2B10 Hochspannungs-Reed-Relaismodul

Voltage classes: 4kV / 6kV / 10kV / 15kV / 20kV series
Contact forms: 1 Form A and series-dependent options
Coil options: Model-specific coil voltage; confirm by datasheet/RFQ
Insulation focus: High dielectric strength and low leakage signal switching

Details · Datenblatt

HRM05-2B15HRM05-2B15 Hochspannungs-Reed-Relaismodul

Voltage classes: 4kV / 6kV / 10kV / 15kV / 20kV series
Contact forms: 1 Form A and series-dependent options
Coil options: Model-specific coil voltage; confirm by datasheet/RFQ
Insulation focus: High dielectric strength and low leakage signal switching

Details · Datenblatt

View complete model index

FAQ

HRM High Voltage Relay Modules selection FAQ

Answers are shown on-page to match the structured FAQ data and help engineers prepare datasheet review or RFQ requests.

How do I choose a HRM High Voltage Relay Modules model?

Start from the application requirement, then compare Voltage classes, Contact forms, Coil options, Insulation focus, Mounting. Open the model detail page and PDF datasheet before confirming the final ordering code.

Where can I find individual datasheets for this product family?

Each representative model card links to its own detail page and PDF datasheet. For production projects, submit an RFQ so voltage, current, mounting and compliance requirements can be confirmed.

What information should be included in an RFQ?

Include working voltage, current, load type, contact or output form, coil or control voltage, mounting style, environment, validation quantity and expected production volume.

Recommended next steps

Continue product selection

Use these internal paths to move from overview to model comparison, datasheet review and RFQ submission.

Download category catalogSave the family PDF for engineering review Request engineering quoteSend application data for model selection and pricing View complete model indexSearch all public relay, contactor and sensor models Read technical libraryReview application notes and selection guidance Hochspannungs-Reed-RelaisCompare related product family options 4KV-Reed-RelaisCompare related product family options 6KV-Reed-RelaisCompare related product family options

HRM high-voltage relay modules integrate multiple reed relay channels on a carrier with screw-terminal or DIN-rail mounting, rated from 4 kV to 15 kV per channel. They simplify wiring in hipot testers, semiconductor test racks and ATE matrices where many isolated high-voltage channels must switch in a compact footprint. Modules are built and 100% tested in-house on the same production lines as our discrete relays.

English engineering resources

HRM High Voltage Relay Modules English catalog

Review the standardized English product-family catalog, datasheets and RFQ path for this product category.

Download Category Catalog Complete Product Catalog Request Engineering Quote

Original source PDFs are preferred when available. Generated English PDFs are used only when no original source PDF is found; final ratings, drawings and application suitability are confirmed by RFQ.

Engineering Filter

Refine this product family

Use the selectors to narrow visible Shop categories or product cards. If exact electrical requirements are not clear, send the filter as an RFQ instead.

Send Filter as RFQ